INTEGRA 2270 POWER QUALITY METER
Power to analyse quality, with a touch
The New Integra 2270 Power Quality Meter Monitors The Quality Of Incoming Electricity With A 0.2S% Accuracy Of Reading
Key Features
- Signal conditioning
Patented* technology enables measurement of power quality within any voltage of electrical supply, in a single product, covering the global range 120/230V of electrical supplies. - Full colour touch screen display
Energy-efficient and intuitive touch screen display with clear graphics and simple navigation. Easy for Field Engineers to set up and configure, reducing site time and saving money during installation. - Inputs and output
- Total measurement for all utilities in a single meter, including measurement of pulses from water and gas meters.
- Can be configured to communicate outputs relating to active and reactive energy to building management systems
- Alarms can be configured for any relevant, measured parameters and can also serve as a trip function
- Easy installation
Plug and socket connectivity for easy installation of prewired looms, saving valuable installation time and reducing wiring errors. Current flows directly through the meter primary CTs, meaning there is no need to terminate the CT wire at the meter.
The Integra 2270 digital meter provides measurement, isolation and conversion of all main electrical parameters and can be used in single-phase and three-phase three-wire unbalanced, four-wire balanced and unbalanced systems. RS485 Modbus RTU communications protocol, pulse/alarm outputs and inputs are fitted as standard.
Features (INT-2270 only)
- Waveform capture 8 cycles per phase
- Sags/swells monitoring to BS EN 50160
- Accuracy to 0.2S% (reading)
Features (all products)
- Full colour, energy efficient, touch screen user interface
- Fits both ANSI and DIN cut-outs
- Alarm/pulsed output
- Pulsed inputs
- User programmable configuration
- Heart beat indication for self checking
- Min/Max value stored in non-volatile memory
- Individual harmonics measurement to 63rd harmonic
- Active power (kW) by phase
- Reactive power (kVAr) per phase
- Apparent power (kVA) per phase
- Current demand (AD) per phase
- Unbalanced voltage (%)
- Unbalanced current (%)
- Internal temperature measurement
- Hours run
- Supported real time clock
- Soft alarms
- Percentage of load bar for full scale indication
- User programmable display screen
- Accuracy to 0.5S% (reading)
- Sub cycle transient monitoring
- Crest Factor Measurement
- K Factor Measurement
Standards
- EMC
- IEC 61000-4-2
- IEC 61000-4-3
- IEC 61000-4-4
- IEC 61000-4-5
- IEC 61000-4-6
- IEC 61000-4-8
- IEC 61000-4-11
- IEC 61326-1, Class A
- IEC 61000-3-2
- IEC 61000-3-3
- Safety
- IEC 61010-1
- Accuracy and Measurement
- IEC 62053-21 class
- IEC 62053-22 class 0.2S
- IEC 62053-24 class 0.5S
- ANSI C12.20
- IEC 61557-12:2018
- Features
- IEC 50160 (sag/swells classes)
- EN60688
- ANSI C37.90.1 (surge withstand)
- ANSI C62.41 (Burst)
- RoHS compliant
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Brand | Crompton |
| Model | Integra 2270 |
| Form Factor | 96x96mm 1/4 DIN, 4-Stud Mount, Switchboard: 4.5-Inch ANSI C39.1 |
| Input Range | 1P2W 57.7-346VAC L-N, 0-1A or 0-5AAC, 1P3W 100-600VAC L-L (57.7-346V L-N), 0-1A or 0-5AAC, 3P3W 100-600VAC L-L, 0-1A or 0-5AAC, 3P4W 100-600VAC L-L (57.7-346V L-N), 0-1A or 0-5AAC, Pulsed, 0-25Hz, Pulsed, 0-25Hz |
| Input Frequency | 50Hz, 60Hz |
| Communications | RS-485 |
| Aux. Power Supply | Switching ~100-240VAC, 50/60Hz |
| Tariff Code | 9030.39.3000 |
| ECCN | EAR99 |