GX90XP-10-11N-3N

I/O Modules

I/O modules are connected to the GX/GP, Expandable
I/O unit, GM main unit, and GM sub unit.

• A module type is seven types, an 
• • analog input, 
  • analog output
  • digital input, 
  • digital output, 
  • digital input/output,
  • pulse input
  • PID control. Note: For the GX90UT PID Control Module, please see GX90UT PID Control Module General Specifications (GS 04L53B01-31EN).
• Input and output have module structure and it can extend them easily.
• The GX90XA analog input module provides four types: 
• • (1) universal type that allows the measurement input for DCV (direct voltage), TC (thermocouple), RTD (resistance temperature detector), and DI (contact or TTL level voltage), 
  • (2) current input type with the built-in shunt resistor to directly input a standard signal of 4-20mA DC, 
  • (3) electromagnetic relay scanner type insusceptible to noises that allows the measurement input for DCV, TC, and DI, and 
  • (4) low withstand voltage relay type that offers a  low cost. In each system, a measurement input signal can be assigned to each channel.
• The GX90YA analog output module is capable of retransmission output of various types of channels and also manual output. It provides current output with channels that are isolated.
  
• The GX90XD digital input module, which allows up to 16 digital inputs or pulse inputs (The pulse input is only for SMARTDAC+ GM.), can be used as a multipoint digital input or pluse input (The pulse input is only for SMARTDAC+ GM.) . This module can also be used as a remote control input.
• The GX90YD digital output module is assigned as a relay output (contact C) and is used when an alarm activates. It can also be used to turn the output on and off manually using the touch panel.
• The GX90YD digital output module is assigned as a relay output (contact C) and is used when an alarm activates. It can also be used to turn the output on and off manually using the touch panel.
  
• The GX90WD digital input/output module provides eight digital inputs or pulse inputs (The pulse input is only for SMARTDAC+ GM.) and six relay outputs. When there are small amounts of digital inputs and digital outputs, you do not need to mount two modules. This enables efficient channel configuration.
• GX90XP pulse input module can receive up to 10 pulse inputs. The maximum input frequency is 20 kHz. The module can be used to integrate pulse signals from flowmeters or the like. Note: Integration requires the math function (/MT option).
  
• Each module provides a M3 screw terminal and clamp terminal ( GX90YD and GX90WD are only M3 screw
  terminal.). Also, the input terminal can be removed and mounted. This enables wiring work to be carried out efficiently.
• The measuring accuracies noted in the general specifications have a margin of error that takes into account the product's components and the equipment used for adjustment and testing.  However, the actual values calculated from the accuracy testing data upon shipment of the instrument from the factory are as follows.