Distributed By: |
|
|
LAN Fox Tone
Generator
Catalog No's 3243 / 3248-K / 3249-K
| Features |
The LAN Fox is a compact, hand-held instrument designed to generate
tracer
tones for locating un-energized LAN cables. When used with an inductive
amplifier, like the Triplett Hound or Hound 2 Probe,
cable tracing is made
quickly and easily. The single selector switch sets the tone of the LAN Fox
to Hi or Lo warble, while the LED gives a visual indication that the unit is on.
LAN Fox General Specifications
| Output Protection |
Will withstand 56V with 400 ohms series resistance applied across the outputs. Will withstand 175V peak with 100 ohms series impedance superimposed onto 56VDC for 100mS (Standard Telco Signals) |
| Cable Types | AT&T 258A, EIA/TIA T568A & T568B,10 Baset Token-Ring, TP+PMD, BNC Cables w/adapter |
| Output Tone | Approx. ±8.0V square wave with fresh battery. Series current limit resistance to 4000 ohms. |
| Battery | 9V Alkaline, NEDA 1604A, such as Eveready 522
(Not included) Battery Required in Transmitter unit only |
| Weight | Less than 7ounces with battery |
| Dimensions | 1" (L) x 2 3/8" (W) x 3 5/8" (H) |
| Accessories | RJ-45 to BNC Adapter |
Note: This
LAN Cable Tester is not intended for use on powered
cables. All cables must be non-powered,
non grounded and
non-connected
Catalog No. 3243: Lan Fox
|
Catalog No. 3248: LAN Fox & Hound 2 Probe Set
Catalog No. 3248K: LAN Fox & Hound 2 Probe Kit
Catalog No. 3249: LAN Fox & Hound Set
Catalog No. 3249:KLAN Fox & Hound
Kit
Back to Triplett Test Equipment Contents
Back to Test Equipment Price List
Phones: 800-926-3837....818-841-2417
FAX 818-926-3736
We accept Visa - MasterCard - American
Express
Jump to IMS (Instrument Meter Specialties) Home Page)
Copyright © 2001 Instrument Meter Specialists