Model 2101
- 3¾ Digit, 3999 Count
- 21 Segment Analog Bargraph
- 29 Ranges and Functions
- Auto / Manual Range Selection
- AC Voltage (400mV to 750V)
- DC Voltage (400mV to 1000V)
- AC & DC Current (4mA to
20A)
- Resistance (400 Ohm to 40M
Ohm)
- Capacitance (4nF to 400nF)
- Temperature Test (-4 °F to 2000
°F)
- Continuity (±50 Ohm)
- Diode Check
- Transistor Check (hFE)
- Auto Polarity
- Range Hold
- RS-232C Port
- Low Battery Indicator
- 9V Battery ( Supplied)
- Designed to Comply with IEC
1010-1
- Three Year Warranty
|
|
Model 2102
- True RMS
- Dual Display
- 3 ½ Digit, 1999 Count
- 42 Segment Analog Bargraph
- 41 Ranges and Functions
- Manual Range Selection
- AC Voltage (200mV to 750V)
- DC Voltage (200mV to 1000V)
- AC & DC Current (4mA to
20A)
- Resistance (200 Ohm to 20M
Ohm)
- Frequency (2KHz to 2MHz)
- Capacitance (2nF to 200nF)
- Temperature Test (-40 °F to1999
°F)
- Continuity (±40 Ohm)
- Diode Check
- Transistor Check (hFE)
- Logic Test
- dB Test
- Auto Polarity
- Data / Auto Hold
- Min-Max Hold
- Relative Mode
- Comparison (Hi, Lo, Pass)
- Memory Recall-
Stores 10
Measured Values
- Range Hold
- RS-232C Port
- Low Battery Indicator
- 9V Battery ( Supplied)
- Designed to Comply with IEC
1010-1
- Three Year Warranty
|
|
Model 2103
- True RMS
- Dual Display with Backlight
- 3 ¾ Digit, 3999 Count
- 42 Segment Analog Bargraph
- 40 Ranges and Functions
- Auto/Manual Range Selection
- AC Voltage (400mV to 750V)
- DC Voltage (400mV to 1000V)
- AC & DC Current (40mA to
20A)
- Resistance (400 Ohm to 40M
Ohm)
- Frequency (4KHz to 4MHz)
- Capacitance (4nF to 200µF)
- Temperature Test (-40 °F to2190
°F)
- Continuity (±40 Ohm)
- Diode Check
- Transistor Check (hFE)
- Logic Test
- dB Test
- Auto Polarity
- Data / Auto Hold
- Min-Max Hold
- Relative Mode
- Comparison (Hi, Lo, Pass)
- Memory Recall-
Stores 5 Measured
Values
- Range Hold
- RS-232C Port
- Low Battery Indicator
- Auto Power Off
- 9V Battery ( Supplied)
- Designed to Comply with IEC
1010-1
- Three Year Warranty
|
|
Model 2104
- Quad Display
- 4 ½ Digit, 1999 Count
- 42 Segment Analog Bargraph
- 37 Ranges and Functions
- Manual Range Selection
- AC Voltage (200mV to 750V)
- DC Voltage (200mV to 1000V)
- AC & DC Current (2mA to
20A)
- Resistance (200 Ohm to 20M
Ohm)
- Frequency (20KHz to 2MHz)
- Capacitance (20nF to 200nF)
- Wrong Input Warning Beeper
- Continuity (±30 Ohm)
- Diode Check
- Transistor Check (hFE)
- Logic Test
- dB Test
- Auto Polarity
- Data / Auto Hold
- Min-Max Hold
- Relative Mode
- Comparison (Hi, Lo, Pass)
- Memory Recall-
Stores 10
Measured Values
- RS-232C Port
- Low Battery Indicator
- Auto Power Off
- 9V Battery ( Supplied)
- Designed to Comply with IEC
1010-1
- Three Year Warranty
|
|
Model 2105
- True RMS
- Quad Display with
Backlight
- 3 ¾ Digit, 3999 Count
- 42 Segment Analog Bargraph
- 52 Ranges and Fnctions
- Auto/Manual Range Selection
- AC Voltage (400mV to 750V)
- DC Voltage (400mV to 1000V)
- AC & DC Current (40µA to
20A)
- Resistance (400 Ohm to 40M
Ohm)
- Frequency (4KHz to 4MHz)
- Capacitance (4nF to 200µF)
- Temperature Test (K Type-40 °F to2190
°F)
- Signal Output (10 Hz to
10.24KHz)
- Wattage (Power Monitor) (4000W
max)
- Continuity (±40 Ohm)
- Diode Check
- Transistor Check (hFE)
- Logic Test
- dB Test
- Wrong Input Warning Beeper
- Auto Polarity
- Data / Range/ Auto Hold
- Min-Max Average Hold
- Relative Mode
- Comparison (Hi, Lo, Pass)
- Memory Recall-
Stores 10 Measured
Values
- Range Hold
- RS-232C Port
- Low Battery Indicator
- Auto Power Off
- 9V Battery ( Supplied)
- Designed to Comply with IEC
1010-1
- Three Year Warranty
|
Model 2105 AC
Wattage Adapter
The Model 2105 comes
with this handy AC Wattage
Adapter which can be used to monitor the
wattage on a wide variety of devices.
When in the "Wattage
Range" the 2105 will
simultaneously display Wattage, AC Voltage,
AC
Current and Power Factor
|
|
ACCESSORIES |
| Accessories
Included:
Triplett SoftDMM ® DATA Acquisition
Software
RS-232C Cable w / 9 Pin Female Connector
Carrying
Case
Red Rubber Boot
Safety Test Leads w / Alligator Clips
AC
Wattage Adapter (2105 only)
K-Type Thermocouple Probe (except
2104)
Capacitance Extension Lead
9 volt Battery
Instruction
Manual
|
|
|
Corrosion Resistant Stainless
Steel Probes- 8¼" Long |
| Cat. No. 72-111 Thermocouple Immersion |
|
| Cat. No. 72-112 Thermocouple Surface |
| Cat. No. 72-113 Thermocouple
Air |
