Distributed By:
Instrument Meter Specialties
Phones: 800-926-3837..818-841-2417 
FAX 818-841-2379
  We accept: 
Visa - MasterCard - American Express

©

MC-1000 High Accuracy Multi-Function Calibrator

Common Features

>Excellent accuracy ± 4%C T/C
±.03°C RTD and 0.015% electrical.

>Choose either read or source modes.

>Operates with external pressure modules.

>10 T/C types; 8 RTD types plus YSI 
400 series thermistor 
( medical applications)

>Full function 4-20 mA read, source,         simulate and read/power modes
with 0.015% reading accuracy.

>Source 0 to 20 volts or read 0 to 20 volts with 0.15% of reading.

>Measure 0 to 250 VDC or VAC

>Store up to nine set points for each 

>RTD function works with  all pulsed XMTR's

>Direct keyboard entry allows for quick output changes.

>RS232 Interface.

A full multi-function calibrator at a very
competitive price with excellent accuracy best 
describes the MC-1000. The MC-1000 combines the accuracy and functions of our nest generation PTC-8000 temperature calibrator with V/ma and frequency functions added.  The performance level is twice that of similarly priced products and will calibrate virtually any process device.

The MC-1000 also combines several DMM functions like voltage measurements to 250 VAC or DC and continuity test functions.  This combination of a high accuracy calibrator along with common DMM functions makes the MC-1000 the only instrument  you may ever need to maintain and calibrate your instrumentation.

Each unit includes: Test leads, carrying case, 4 AA alkaline batteries, NST Certificate, and instruction manual.
General Specifications:
Pressure Ranges: Various ranges in 29 different pressure modules – see Pressure Module Ranges: Specifications
T/C Ranges: J,K,T,E,R,S,N,B,L,U including -10 to70 mV
RTD Ranges: Pt 385 (100, 200, 500, 1000 ohms)
Pt 392, JIS, Ni120, CU10, YSI400
Ohms Ranges: 0 to 400.00 and 400.0 to 4000.0
mA Range: 0 to 24.000 mA
Voltage: (Low) Read 0-20.000 VDC Source 0-10.000 VDC
(High) Read only 0-250 VDC or VAC
Frequency: 0-1000.0 CPM
0-1000.0 Hz
0-10.00 KHz
Continuity: 0 to 400.0 ohms, audible tone when under 10 ohms
Accuracy: T/C Type J: ±.3°C ±10 mV (±0.4°C total error)
RTD PT100: ±.1°C ±.075 (±0.3°C total error)
Ohms (400): ±0.1
Ohms (4000): ±1.0
mA Compliance: Up to 1000 load
Voltage Drive Capability: 1 mA
RTD IEX-range: 0.01 mA to 3 mA
RTD Frequency Response: 10 mS – works with all pulsed XMTR’s
Oper. Temp: -10°C to 50°C
Storage Temp: -20°C to 70°C
Loop Power: 4 AA alkaline batteries, 25 hours typical operating time
Size: 7.5" x 4" x 1.5"

View PDF Product Comparison File(61.5KB)

View Specification PDF File (78.8KB)

Back to Martel Calibrators

Return to IMS Home Page