| Display |
Two lines characters LCD display (16 characters
each) |
| Connector |
RJ45 and BNC |
| Category |
CAT3, CAT4, CAT5 |
| Faults Status |
Opens, Shorts, Reversed, Crossed, Split Pair. |
| Test Type |
TEST provides a pass / fail report on the cable
under test. In
case a failure has been detected, the display offers additional
diagnostic information.
LENGTH provides the length of each pair (in case a twisted pair
cable is being tested).
WIRE MAP provides the detail wiring for the cable. |
| Cable Length |
Range 2 to 999 ft or 1.0 to 350 m.
Resolution 1 ft or 0.5 m.
Accuracy 5% + 3 ft or 5% + 1 m |
| Power |
6 pcs 1.5V size AAA alkaline battery. |
| Input Protection |
The inputs withstand telephone ringing and loop
voltages. |
| Size / Weight |
152 mm x 72 mm x 35 mm / Approx. 360 g |
| Environment Conditions |
Operating : 0oC to +50oC ,
Storage : -20oC to + 60oC |
| Accessories |
Instruction manual , Carry case , One UTP Category 5
patch
cable,
One RJ45F - RJ45F female coupler, Cable identifier #1 for the
verification of the wire map. |