| Input Configurations |
Single Ended |
| Input Biass Current |
2nA (typ) |
| Conversion Rate |
100 sec |
| Display |
LED, 100mm (red) |
| Display Speed |
12.5 per sec |
| Polarity |
A "-" is displayed
automatically |
| Overrange Indication |
When input exceeds the maximum
display, display 0.L or -0.L |
| Decimal Point |
Settable to any digit position |
| Zero Display |
Leading zero suppression |
| External Control |
Hold/Start
Digital Zero (D.Z.)
Reset (R.RE)
Peak Hold (PH)
Valley Hold (VH)
Peak-Valley Hold (PVH) |
| Control System |
Microcomputer |
| Setting Range |
-9999~0~+9999 |
| Comparative Condition |
Indication > high setpoint->HI
High set point>= Indication>=Low set
point->GO
Indication< low set point->LO |
| Relay Contact Capacity |
AC250V 0.1A Resistive load
AC120V 0.5A Resistive load
DC28V 1A Resistive load |
| Photo Coupler output |
Applied voltage 30V max
Current 20mA max
Saturated output voltage less than 1.2V at 20mA |
| Operating Temperature |
0~50°C 35~85% RH |
| Power Supply |
90~132V AC
180~264V AC |
| Power Consumption |
2.5VA Typ |
| Dimensions |
48(H) x 96(W) x 95(D)mm DIN size |
| Weight |
350g |
| Dielectric Strength |
Between input (LO) and earth, 500VDC
Between power supply terminal and input terminal,
earth, COM, case, relay output 1500VAC/min |
| Insulation Resistance |
500VDC 100M ohms or more at above
terminals |
