| Input Configuration |
Single Ended |
| Input Bias Current |
2nA (typ) |
| Conversion Rate |
20/sec or 2.5/sec |
| Normal Mode Rejection |
More than 40dB (50/60Hz) |
| Zero Stability |
Automatic Zero Adjustment |
| Zero Display |
Leading zero suppression |
| Display |
LED, 8mm 3 ½ digit |
| Decimal Point |
Settable to any digit position |
| Polarity |
A "-" is displayed
automatically |
| Overrange Indication |
When input exceeds the maximum
display, flash just before overflow |
| Power Supply |
AC90~132V, AC180~264V, DC9V~30V |
| Operating Temperature |
0~50°C, 35 to 85% RH |
| Power Consumption |
Approx. 3VA |
| Dimensions |
36(H) x 72(W) x 110(D)mm DIN Size |
| Weight |
Approx. 250g |
| Dielectric Strength |
Between input (Lo) terminal and
earth, COM DC500V;
Between power supply terminal and input terminal,
Common, relay output, AC 1500V/1min |
| Insulation Resistance |
DC500V, 100M ohms at above terminals |
| Control System |
8-bit microcomputer |
| Setting Range |
-1999~0~+1999 |
| Comparative Condition |
Indication>High setpoint->HI
High setpoint >=indication >=Low setpoint=GO
Indication< setpoint=LO |
| Relay Contact Capacity |
250V AC 0.1A Resistive load
120V AC 0.5A Resistive load
28V DC 1A Resistive load |
| External Control |
Hold;
Com and HOLD terminal Shorted or OV
Start;
0V to 5V(20ms-40ms) positive pulse or open digital
zero;
COM and DIGITAL ZERO terminal |
